Auto Purge Log Configuration; Purge Logs - Hologic Panther System Operator's Manual

Table of Contents

Advertisement

Auto Purge Log Configuration

Purging of Activity logs, Maintenance logs, Message logs, and Results can be done
automatically based upon the duration that the logs have resided in the database.
To configure the logs to purge automatically:
1. From the Administration screen, select Data Management.
A Data Management screen opens.
2. Select one of the following four (4) Auto Purge categories:
Auto Purge Activity Log Config—To configure the automatic purge
l
settings for the Activity Logs.
Auto Purge Maintenance Log Config—To configure the automatic purge
l
settings for the Maintenance Logs.
Auto Purge Message Log Config—To configure the automatic purge
l
settings for the Message Logs.
Auto Purge Results Config—To configure the automatic purge settings for
l
results.
The Auto Purge Log Config window of the selected category opens.
3. From the Auto Purge Log Config window, check the cell for Enable Auto Purge
Log Config to configure the system to automatically purge the selected logs
based upon the selected settings.
4. Select the Purge by days older than field.
A number keypad opens.
5. From the keypad, set the number of days to retain the selected log files in the
database before they are purged from the system.
6. Select OK.
The keypad closes.
7. If configuring the Auto Purge Results Config settings, check the cell for Only
purge results if they have been transmitted to LIS to retain results that have
not been transmitted to the site's LIS. If this setting is not desired or the system is
not connected to an LIS, leave this cell unchecked.
8. Select Accept once all settings are configured as desired.
The system purges any logs or results that have been in the system for more
than the number of days entered. Going forward, log files for the selected
category will be removed from the system after the chosen number of days.

Purge Logs

To manually purge logs:
1. From the Administration screen, select Data Management.
The Data Management screen opens.
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
System Administration
216

Advertisement

Table of Contents
loading

Table of Contents