Figure 41. Lis Configuration Screen-File Settings (Example); Table 46. Lis Configuration Screen Location Descriptions - Hologic Panther System Operator's Manual

Figure 41. LIS Configuration Screen—File Settings (Example)

Table 46. LIS Configuration Screen Location Descriptions

Screen Buttons
1. General Settings
2. Serial Settings
3. TCP/IP Settings
4. File Settings
5. Save
6. Start
7. Stop
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)
Description
Select the options in this panel to configure
bidirectional transfer as needed (see LIS
Configuration on page 236). Selecting one of the
three (3) Interface Layer categories opens the
specific configuration setting menu on the screen.
Select the options in this panel for optimal LIS
communication when using a serial connection (see
LIS Configuration on page 236).
Select the options in this panel for optimal LIS
communication when using a TCP/IP connection
(see LIS Configuration on page 236).
System directories for messages sent to and
received from the LIS (see LIS Configuration on page
236). These directories are only accessible by
Hologic personnel.
Select this button to save configurations.
Select this button to enable LIS connection.
Select this button to disable LIS connection.
Overview
83