Table of Contents
Advertisement
Data Export
Export data to a drive location or to a USB flash drive. The system is equipped with
four (4) USB ports. The USB ports are located on the right of the instrument, near the
connection point for the monitor arm. There are also two (2) additional USB ports
located on the computer. Only use USB flash memory drives that meet the following
criteria.
The USB flash memory drive must not be NTFS (New Technology File System)
l
formatted.
The USB flash memory drive must not have pre-loaded software.
l
The USB flash memory drive must be dedicated for use with Panther System
l
files. Do not use the designated USB flash memory drive with other file types.
Exporting to a USB Flash Drive
1. Insert a USB flash memory drive into a free USB port prior to exporting data
from the instrument.
2. The USB drive symbol appears in the Status panel once the system
recognizes the connection (see Additional Status Panel Icons on page 49).
Removal of a USB Flash Drive
1. From the Icon Status Panel, select the USB Drive icon
The USB Storage Removal window opens.
2. Select the device to be removed.
3. Select Unmount.
A confirmation window opens.
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
Figure 80. USB Storage Removal Window (Example)
System Operation
.
156
Advertisement
Table of Contents
