Reports; Activity Log Report - Hologic Panther System Operator's Manual

Report Type
Lot Search Report
Maintenance Checklist
Maintenance Log Report
Messages Log Report
Prevalence Report
Results by Worklist
Report
Results Report
Sample Audit Report
Test Count Report
Worklist Lot Report
*Where YYYYMMDD-HHMMSS represents the time the report is generated.
**Where YYYYMMDD-HHMMSS represents the time the worklist is created.
Note—If saving to a USB flash drive, wait until the "Update In Progress"
notification clears before removing the USB flash drive to avoid data
corruption (see Removal of a USB Flash Drive on page 156).

Reports

Activity Log Report

Select Activity Log Report and enter the desired date range on the right of the Report
Menu screen to generate an Activity Log Report. Check one of the three (3) cells in the
Creation Date panel to generate a report that contains all activities that were performed
over the selected date range. Once the filter has been updated, select View, Print, or
Export as desired to access the Activity Log Report.
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)
File Name
LotSearchYYYYMMDD-HHMMSS*.pdf
MaintenanceChecklistYYYYMMDD-
HHMMSS*.pdf
MaintenanceLogYYYYMMDD-
HHMMSS*.pdf
MessagesYYYYMMDD-HHMMSS*.pdf
PrevalenceReportYYYYMMDD-
HHMMSS*.pdf
ResultsWorklistID-YYYYMMDD-
HHMMSS**.pdf
ResultsYYYYMMDD-HHMMSS*.pdf
SampleYYYYMMDD-HHMMSS*.pdf
TestYYYYMMDD-HHMMSS*.pdf
WorklistWorklistIDYYYYMMDD-
HHMMSS**.pdf
System Operation
165