Send Logs; Figure 123. Send Logs Window (Example) - Hologic Panther System Operator's Manual

3. Select Yes to initiate the unload process.
The system performs an MTU unload. The entire process can take up to 60 minutes.

Send Logs

Complete the following procedure for exporting system log files when instructed by
Hologic Technical Support. Do not send logs when the system is in the Assay Processing
state.
1. From the Messages screen, select Send Logs.
A Send Logs window opens.
2. Select the start and end dates as specified by Hologic Technical Support.
3. Check or uncheck file categories as instructed.
4. Select the file directory button, change the export location, and select OK, if
necessary.
A directory opens to allow for changes to the desired file destination.
5. Select Send to Directory.
A confirmation window opens.
6. From the confirmation window, select Yes.
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)

Figure 123. Send Logs Window (Example)

Troubleshooting
259