Figure 112. Add Operator Window (Example) - Hologic Panther System Operator's Manual

2. Select the Operator Name field, enter a name that is between 6–30 characters
long, and select OK.
3. Select the Initials field, enter initials that are between 2–3 characters long, and
select OK. Do not select an initial with spaces.
4. Select the User Name field, enter a user name that is between 6–15 characters
long, and select OK. This is the user name that the operator will use to log onto
the system. Do not select a user name that contains spaces.
5. Select the Password field, enter a password that is between 6–15 characters
long, and select OK. Enter the password twice for confirmation.
6. Select the role to be assigned to this operator account in the Role Panel.
The default operator accounts are assigned rights that allow them to perform
basic system operations (the "Operator" role). Additional rights can be assigned
to an operator account based upon the roles described in the following table.
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)

Figure 112. Add Operator Window (Example)

System Administration
241