Exporting Reports - Hologic Panther System Operator's Manual

2. Make any needed changes to the printer setup.
3. Select the appropriate button in the printer window to start printing.
The system sends the report to the printer.

Exporting Reports

Export reports to a desired drive location. The selected reports can be exported
directly from the Report Menu screen or from the Report Navigation Bar.
To export reports:
1. From the Report Menu screen or the Report Navigation Bar, select Export.
The Report Export window opens with the Output Directory field listing one of
the following locations:
The network destination selected in the Report Management menu of the
l
System Configuration screen (see Report Export Directory on page 229)
The USB drive location (E:\) if a USB disk is installed
l
2. Select the field directory button
if necessary.
A directory opens to allow for changes to the desired file destination.
3. Select OK.
The system exports the report file to the chosen export file location.
The default names of the .pdf data file for each of the report types are as follows:
Report Type
Activity Log Report
Assay Reagent Report
Configuration Report
Diagnostics Log Report
Exceptions by Worklist
Report
Exceptions Report
Levey-Jennings Report
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)
, change the export location, and select OK,
File Name
ActivityYYYYMMDD-HHMMSS*.pdf
AssayReagentYYYYMMDD-HHMMSS*.pdf
ConfigurationYYYYMMDD-HHMMSS*.pdf
DiagnosticsYYYYMMDD-HHMMSS*.pdf
ExceptionsWorklistYYYYMMDD-
HHMMSS**.pdf
ExceptionsYYYYMMDD-HHMMSS*.pdf
LeveyJenningsYYYYMMDD-HHMMSS*.pdf
System Operation
164