Table of Contents
Advertisement
The Sample Defaults window opens with current default assay types and test
replicate settings.
2. From the Sample Defaults window, select the Replicates field.
A number keypad opens.
3. From the keypad, choose the desired number of replicates to be tested for all
chosen assay types in the sample defaults and select OK when finished.
The number keypad closes. The Replicates field updates with the desired
replicate number.
The Sample Defaults window remains on display after completion of this task.
4. To continue with sample default setup, select another button on the window or
select Accept to accept all changes and exit to the Sample Rack Bay screen.
Deleting an Assay Test from the Sample Defaults
To delete an assay test from the Sample Defaults:
1. From the Sample Defaults panel of the Sample Rack Bay screen, select Set.
The Sample Defaults window opens with the current default assay types and
test replicate settings.
2. From the Sample Defaults window, select the X button next to the assay(s) to be
removed from the sample defaults.
The selected assay test(s) are removed from the Sample Defaults window.
The Sample Defaults window remains on display after completion of this task.
3. To continue with sample default setup, select another button on the window or
select Accept to accept all changes and exit to the Sample Rack Bay screen.
Configuring Additional Sample Defaults
To alter additional Sample Defaults options:
1. From the Sample Defaults panel of the Sample Rack Bay screen, select Set.
The Sample Defaults window opens with current default assay types and test
replicate settings.
2. From the Sample Defaults window, select More.
The Sample Defaults screen expands with a display of sample prefix and suffix
information fields.
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
System Operation
119
Advertisement
Table of Contents
