Table of Contents
Advertisement
Table 37. Sample Rack Loading Screen Descriptions (Continued)
Screen Location
6.
*Assign EQC
7.
*Select EQC
Assays
8.
*Reflex All
9.
*Apply Dilution
All
10.
SID and Status
Table
* These buttons are only visible under certain system software configurations.
Sample Details Screen
To access the Sample Details screen:
From the Sample Rack Loading screen, select the Sample Details/Edit button.
l
From the Sample Rack Loading screen, click on a tube (see Sample Rack Loading
l
Screen on page 66).
Refer to the Sample Details screen for test order status and for altering the test order
assignment for the sample.
®
Panther System
Operator's Manual
AW-17791-001 Rev. 002 (EN)
Description
Select the message in the Status column for the
relevant EQC then select this button to choose the
pre-defined EQC information (see Loading
Unlabeled Quality Controls on page 248).
Select the message in the Status column for the
relevant EQC then select this button to choose the
assay type(s) (see Selecting Assays During EQC
Loading on page 249).
Select this button to assign reflex test orders to all
samples in the rack that have unresolved reflex
assay test orders (see Designating Reflex Tests
During Sample Rack Loading on page 253).
Select this button to assign a dilution factor to all
quantitative samples in the rack (see Dilution Factors
on page 127).
Sample ID and loading error status information for
each of the samples in the Sample Rack.
Overview
68
Advertisement
Table of Contents
