Adding/Editing Quality Controls; Adding External Quality Controls; Table 113. External Quality Control Configuration Options; Table 114. Manufacturer's Controls/Calibrators Configuration Options - Hologic Panther System Operator's Manual

Table 113. External Quality Control Configuration Options

Data Field Description
Control ID The identification number recognized by the system for the control.
Display The identification that will be displayed on reports for the control.
Name
Assay The assay type(s) that can utilize the control.
Lot The user-defined lot number for the control.
Expiration The user-defined expiration date for the control.
Replicates The number of replicates to be run for the control.
The following table provides the information displayed for each manufacturer quality
control on the Quality Control Configuration screen.

Table 114. Manufacturer's Controls/Calibrators Configuration Options

Data Field Description
Assay The assay type(s) that can utilize the control/calibrator.
Ctrl/Cal The name of the control/calibrator.
Name
Result The target analyte that can utilize the control/calibrator.
Type
Mean The mean value entered for the applicable control/calibrator.
Standard The standard deviation value entered for the applicable
Deviation control/calibrator.

Adding/Editing Quality Controls

Adding External Quality Controls

To create a new EQC:
1. From the External Quality Controls tab on the Quality Control Configuration
screen, select Add.
The Add Quality Control window opens.
®
Panther System Operator's Manual
AW-17791-001 Rev. 002 (EN)
System Administration
245