Oracle X8-2L Service Manual page 106

Install an M.2 Flash SSD
2. Install the M.2 flash SSD into socket SSD0 on the flash riser board.
a. Align and then insert the plastic retainer clip into the slot on the M.2 flash
SSD [1].
b. Hold the M.2 flash SSD so that the end of the card containing the plastic
retainer clip is approximately one-half to one inch above the riser board and
the other end is adjacent to the riser SSD socket [1].
Gently slide the M.2 flash SSD forward and into the connector to engage the
c.
flash SSD contacts with the riser board socket [2].
d. Using your fingers, push down on the end of the card containing the plastic
retainer clip until the M.2 flash SSD snaps into place on the riser board [2].
You will hear an audible click when the M.2 flash SSD is secured to the flash riser board.
3. Perform the steps to install the M.2 flash riser board with the replacement flash
SSD into the server.
See "Install a Flash Riser Board" on page
4. Return the server to operation.
Install the server top cover.
a.
See
106 Oracle Server X8-2L Service Manual • January 2021
"Install the Server Top Cover" on page
101.
218.