Oracle X8-2L Service Manual page 156

Install a Processor
As you tighten nuts 3 and 4, some resistance occurs as the bolster leaf spring rises and
comes in contact with the heatsink.
Caution -
module.
5. Return the server to operation.
a. Install the air baffle.
See
b. Install the server top cover.
See
Return the server to the normal rack position.
c.
See
d. Reconnect the power cords to the power supplies, and power on the server.
See
Server" on page
e. Verify that the power supply AC OK LED is lit.
6. Use Oracle ILOM to clear server processor faults.
Refer to the Oracle Integrated Lights Out Manager (ILOM) 5.0 Documentation Library at
https://www.oracle.com/goto/ilom/docs
a.
To show server faults, log in to the server as root using the Oracle ILOM CLI,
and type the following command to list all known faults on the server:
->
The server lists all known faults, for example:
-> show /SP/faultmgmt
156 Oracle Server X8-2L Service Manual • January 2021
Using an incorrect torque setting or driver bit can damage a processor-heatsink
"Install the Air Baffle" on page
"Install the Server Top Cover" on page
"Return the Server to the Normal Rack Position" on page
"Reconnect Power and Data Cables" on page 222
222.
show /SP/faultmgmt
Targets:
shell
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
115.
218.
and "Power On the
for more information about the following steps.
220.