Bios Advanced Menu Processor Configuration Options - Oracle X8-2L Service Manual

BIOS Advanced Menu Selections
Setup Options
NVRAM CR1 PCIE Root Port
Number
NVRAM CYCLE ROUTER 2
ENABLE
NVRAM CR2 PCIE Root Port
Number
SATA Port 0 Software Reserve
Port 0
Hot Plug
Configure as eSATA
Mechanical Presence Switch
Spin Up Device
SATA Device Type
SATA Topology
SATA Port 1, Port 2, Port 3,
Port 4, Port 5, Port 6, and Port
7 Software Reserve
BIOS Advanced Menu Processor Configuration
Options
The following table describes the BIOS Advanced Menu processor configuration options.
Setup Options
Hyper-threading ALL
272 Oracle Server X8-2L Service Manual • January 2021
Options
PCI Express Root Port 1...20
None PCI Express Root Port
Disable/Enable
PCI Express Root Port 1...20
None PCI Express Root Port
Disable/Enable
Disable/Enable
Disable/Enable
Disable/Enable
Disable/Enable
Hard Disk Drive/Solid State
Drive
Unknown/ISATA/Direct
Connect/Flex/M2
Options
Disabled/Enabled
Defaults
Disable
Enable
Disable
Disable
Enable
Disable
Hard Disk Drive
Unknown
Defaults
Enabled
Description
Choose a RootPort that is
enabled for router cycle 1 for
NVRAM engine.
Enable or disable cycle router 2
for NVRAM Remapping engine.
Use this option to choose a
RootPort that is enabled for
router cycle 2 for NVRAM
engine.
Enable or disable the SATA port.
Designate the port as hot-
pluggable.
Use this option to configure
the port as an external SATA
(eSATA) device.
Use this option to enable/
disable device reporting when
the device has a mechanical
presence switch.
Use this option to enable/disable
staggered spin up on the device.
Use this option to identify the
type of drive that is connected to
the SATA port.
Use this option to identify the
SATA topology for the SATA
port.
The same options as SATA
Port 0 Software Reserve are
displayed
Description
Enable Hyper Threading.
When enabled, two threads
are available per enabled core.