Table of Contents
Advertisement
4.
Using a Torx T15 screwdriver, loosen the right-side and left-side spring-mounted
screws that secure the disk backplane to the chassis [3].
Using a Torx T25 screwdriver, loosen the spring-mounted screws that secure the
5.
backplane bracket to the chassis, then lift the bracket from the server [4].
6.
Lift the disk backplane up to release it from the standoff hooks and out of the
chassis [5 and 6].
7.
Place the disk backplane on an antistatic mat.
Related Information
"Install the Disk Backplane" on page 164
■
Remove the Disk Backplane
Servicing the Disk Backplane (FRU)
163
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the X8-2L and is the answer not in the manual?
Questions and answers