Servicing Nvme Cables (Fru); Remove Nvme Cables - Oracle X8-2L Service Manual

Servicing NVMe Cables (FRU)

The following section describes how to service NVMe cables. NVMe cables are field-
replaceable units (FRUs). For more information about FRUs, see
Breakdown" on page 20
NVMe cables should be removed and replaced only by authorized Oracle Service
Caution -
personnel.
The system supplies power to the cables even when the server is powered off.
Caution -
To avoid personal injury or damage to the server, you must disconnect power cords before
servicing the cables.
These procedures require that you handle components that are sensitive to
Caution -
electrostatic discharge. This sensitivity can cause the component to fail. To avoid damage,
ensure that you follow electrostatic discharge safety measures and antistatic practices. See
"Electrostatic Discharge Safety" on page
This section covers the following procedures:
"Remove NVMe Cables" on page 195
■
"Install NVMe Cables" on page 198
■
"Verify NVMe Cable Connections" on page 200
■
Related Information
"Servicing Storage Drives (CRU)" on page 69
■
"Servicing the Disk Backplane (FRU)" on page 159
■
"Servicing SAS Cables (FRU)" on page 189
■

Remove NVMe Cables

Prepare the server for service.
1.
and "Field-Replaceable Units" on page
52.
"Illustrated Parts
22.
Servicing NVMe Cables (FRU) 195