Oracle X8-2L Service Manual page 267

Setup Options
EMS Console Redirection
Console Redirection
Terminal Type
Bits per Second
Data Bits
Parity
Stop Bits
Options
Disabled/Enabled
Disabled/Enabled
VT100/VT100+/VT-UTF8/
ANSI
9600
19200
38400
57600
115200
7/8
None/Even/Odd/Mark/Space
1/2
Defaults
Disabled
Enabled
VT100+
9600
8
None
1
BIOS Setup Utility Menu Options
BIOS Advanced Menu Selections
Description
Enable or disable console
redirection for Windows
Emergency Management Service
(EMS) administration.
Enable or disable console
redirection.
Select the emulation for the
terminal:
■ VT100: ASCII character set.
■ VT100+: Extends VT100 to
support color, function keys,
etc.
■ VT-UTF8: Uses UTF8
encoding to map Unicode
characters onto one or more
bytes.
■ ANSI: Extended ASCII
character set.
Select the serial port
transmission speed. The
speed must be matched on the
connecting serial device. Long
or noisy lines require lower
speeds.
Select the data bits.
A parity bit can be sent with
the data bits to detect some
transmission errors.
■ None: No parity bits are
sent.
■ Even: Parity bit is 0 if the
number of 1s in the data bits
is even.
■ Odd: Parity bit is 0 if the
number of 1s in the data bits
is odd.
■ Mark: Parity bit is always 1.
■ Space: Parity bit is always 0.
Mark and Space parity do not
allow for error detection. They
can be used as an additional data
bit.
Stop bits indicate the end of
a serial data packet. (A start
267