Servicing The Temperature Sensor (Fru); Remove The Temperature Sensor - Oracle X8-2L Service Manual

Servicing the Temperature Sensor (FRU)

The following section describes how to service the temperature sensor. The temperature sensor
is a field-replaceable unit (FRU). For more information about FRUs, see
Breakdown" on page 20
The temperature sensor should be removed and replaced only by authorized Oracle
Caution -
Service personnel.
Ensure that all power is removed from the server before removing or installing the
Caution -
temperature sensor. You must disconnect the power cables before performing this procedure.
These procedures require that you handle components that are sensitive to
Caution -
electrostatic discharge. This sensitivity can cause the component to fail. To avoid damage,
ensure that you follow electrostatic discharge safety measures and antistatic practices. See
"Electrostatic Discharge Safety" on page
This section covers the following procedures:
"Remove the Temperature Sensor" on page 175
■
"Install the Temperature Sensor" on page 178
■
Related Information
"Troubleshooting Using the Server Front and Back Panel Status Indicators" on page 30
■

Remove the Temperature Sensor

1. Prepare the server for service.
Power off the server and disconnect the power cords from the power
a.
supplies.
and "Field-Replaceable Units" on page
52.
"Illustrated Parts
22.
Servicing the Temperature Sensor (FRU) 175