Servicing Processors (Fru) - Oracle X8-2L Service Manual

Servicing Processors (FRU)

The following section describes how to service processors. Processors are field-replaceable
units (FRUs). For more information about FRUs, see
and "Field-Replaceable Units" on page
Processors must be removed and replaced only by authorized Oracle Service
Caution -
personnel.
Ensure that all power is removed from the server before removing or installing a
Caution -
processor. You must disconnect the power cables from the system before performing these
procedures.
These procedures require that you handle components that are sensitive to
Caution -
electrostatic discharge. This sensitivity can cause the component to fail. To avoid damage,
ensure that you follow electrostatic discharge safety measures and antistatic practices. See
"Electrostatic Discharge Safety" on page
Note - On single-processor systems, processor socket 1 (P1) is shipped without a heatsink and
processor filler cover. To protect the delicate processor socket pins, do not remove the processor
cover that was installed on the motherboard.
This section covers the following topics:
"Identify and Remove a Processor" on page 146
■
"Install a Processor" on page 152
■
Related Information
"Servicing the DIMMs (CRU)" on page 119
■
"Illustrated Parts Breakdown" on page 20
22.
52.
Servicing Processors (FRU) 145