Oracle X8-2L Service Manual page 100

Remove a Flash Riser Board
b. Attach an antistatic wrist strap to your wrist, and then to a metal area on the
chassis.
See
c. Remove the server top cover.
See
To remove the flash riser board, do the following:
2.
a. Rotate both riser board socket levers outward as far as they go.
Note -
open the socket levers.
b. Carefully lift the riser board straight up to remove it from the sockets.
Place the riser board on an antistatic mat. If required, perform the procedures for removing
the M.2 flash SSD from the flash riser board. See
SSD" on page
100 Oracle Server X8-2L Service Manual • January 2021
"Take Antistatic Measures" on page
"Remove the Server Top Cover" on page
The green Power LED indicator located on the riser board is extinguished when you
103.
65.
65.
"Identify and Remove an M.2 Flash