Oracle X8-2L Service Manual page 235

2. Use the left and right arrow keys to select the different primary menu options.
As you select each menu option, the top-level screen for that menu option appears.
3. To navigate options presented on a top-level screen, use the up and down arrow
keys.
Only options that can be modified are highlighted when you press the up and down arrow keys.
If an option can be modified, as you select the option, user instructions for
■
modifying the option appear in the right column of the screen.
If an option is a link to a sub-screen, a description of the sub-menu content
■
appears in the right column.
Modify an option by pressing the + or - (plus or minus) keys or by pressing Enter
4.
and selecting the desired option from the pop-up menus.
5. Press the Esc key to return from a sub-menu screen to the previous menu
screen.
Pressing Esc from a top-level menu is equivalent to selecting the Discard Changes and Exit
option from the Save & Exit Menu.
6. Modify parameters as needed.
7. Press the F10 key to save your changes and exit the BIOS Setup Utility.
Alternatively, you can select the Save & Exit menu, and then select Save Changes and Exit to
save your changes and exit the BIOS Setup Utility.
After modifying any BIOS settings, the subsequent reboot might take longer than a
Note -
typical reboot where no settings were modified. The additional delay is required to ensure that
changes to the BIOS settings are synchronized with Oracle ILOM.
Related Information
"BIOS Setup Utility Menus" on page 232
■
"BIOS Key Mappings" on page 232
■
"BIOS Setup Utility Menu Options" on page 261
■
Navigate BIOS Setup Utility Menus
Setting Up BIOS Configuration Parameters 235