Oracle X8-2L Service Manual page 172

Install the Front LED Indicator Module
Note -
bundles from the cable trough along the left side of the chassis.
Note -
c. Insert and tighten the two No. 2 Phillips screws to secure the LED indicator
module to the server front panel [1].
d. Install the FIM cable and Temp Sensor Access cover to the chassis by
inserting it into the FIM cable and Temp Sensor Access cover slot [2].
Caution -
Temp Sensor Access cover to the chassis.
e. Install the three No. 2 Phillips screws to secure the FIM cable and Temp
Sensor Access cover to the chassis [2].
Reconnect the LED indicator module cable to the motherboard.
2.
172 Oracle Server X8-2L Service Manual • January 2021
To ease installation of the LED indicator module cable, slightly lift the SAS cable
Cable part number 7315469 is required for the LED indicator module.
Be careful not to damage the temperature sensor when installing the FIM cable and