Servicing the Motherboard Assembly (FRU)
The following section describes how to service the motherboard assembly. The motherboard
assembly is a field-replaceable unit (FRU). For more information about FRUs, see
Parts Breakdown" on page 20
The motherboard assembly should be removed and replaced only by authorized
Caution -
Oracle Service personnel.
Ensure that all power is removed from the server before removing or installing the
Caution -
motherboard. You must disconnect the power cables before performing these procedures.
These procedures require that you handle components that are sensitive to
Caution -
electrostatic discharge. This sensitivity can cause the component to fail. To avoid damage,
ensure that you follow electrostatic discharge safety measures and antistatic practices. See
"Electrostatic Discharge Safety" on page
This section covers the following procedures:
"Remove the Motherboard Assembly" on page 203
■
"Install the Motherboard Assembly" on page 212
■
Related Information
"About System Components" on page 19
■
Remove the Motherboard Assembly
Prepare the server for service.
1.
a.
Power off the server and disconnect the power cords from the power
supplies.
See
"Powering Down the Server" on page
and
"Field-Replaceable Units" on page
52.
55.
Servicing the Motherboard Assembly (FRU)
"Illustrated
22.
203
Need help?
Do you have a question about the X8-2L and is the answer not in the manual?
Questions and answers