Oracle X8-2L Service Manual page 208

Remove the Motherboard Assembly
DIMMs
■
See
Note -
from which they were removed. Performing a one-to-one replacement of the DIMMs
significantly reduces the possibility that the DIMMs will be installed in the wrong slots. If
you do not reinstall the DIMMs in the same slots, server performance might suffer and some
DIMMs might not be used by the server.
M.2 flash riser SSDs
■
See
Board" on page
USB flash drive
■
See
Drive" on page
8. Remove the processors from the failed motherboard.
See "Identify and Remove a Processor" on page
9. Remove the processor socket covers from the replacement motherboard and
install the processors.
208 Oracle Server X8-2L Service Manual • January 2021
"Identify and Remove a DIMM" on page 128
Install the DIMMs only in the slots (connectors) that correspond to the slots
"Remove a Flash Riser Board" on page 99
101.
"Remove an Internal USB Flash Drive" on page 109
110.
and "Install a DIMM" on page
and "Install a Flash Riser
and "Install an Internal USB Flash
146.
130.