Access Bios Setup Utility Menus - Oracle X8-2L Service Manual

Function Key
F1
F2
F8
F10
F12
Related Information
"Access BIOS Setup Utility Menus" on page 233
■
"Navigate BIOS Setup Utility Menus" on page 234
■

Access BIOS Setup Utility Menus

You can access the BIOS Setup Utility screens from the following interfaces:
Use a terminal (or terminal emulator connected to a computer) through the serial port on the
■
back panel of the server.
Connect to the server using the Oracle ILOM Remote System Console Plus application.
■
1. Reset or power on the server.
For example, to reset the server:
From the local server, press the On/Standby button on the front panel of the server to
■
power off the server, and then press the On/Standby button again to power on the server.
From the Oracle ILOM web interface, click Host Management → Power Control and
■
select Reset from the Select Action list. Click Save, and then click OK.
From the Oracle ILOM CLI, type
■
2. After the server resets, to enter the BIOS Setup Utility, press the F2 key (Ctrl
+E from a serial connection) when prompted and while the BIOS is running the
power-on self-tests (POST).
Control Key Sequence BIOS Setup Function
Ctrl+Q Activate the Setup Utility Help menu.
Ctrl+E Enter BIOS Setup Utility while the system is performing
power-on self-test (POST).
Ctrl+P Activate the BIOS Boot Menu.
Ctrl+S Save and Exit changes.
Ctrl+N Activate Network boot.
reset /System
Access BIOS Setup Utility Menus
Setting Up BIOS Configuration Parameters 233