New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
12.3 TRANSMISSION BELT
TYPE OF BELT
New Model
S0K001513AA
Old Model
S0K000671AB
The belt tension must be measured in the point indicated by the green arrow.
12.4 FLYWHEEL
Apply Loctite 243 on the screws (15) and tighten them with a torque equal to 5 Nm.
Document uncontrolled when printed
Figure 255
Belt replaced with a new
one
120 ±5 Hz
110 ± 5 Hz
Table 52
15
14
Figure 256
TENSIONING
Belt loosened / removed and
then the same one reassembled
on the equipment
105 ± 5 Hz
105 ± 5 Hz
Page 209