New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Figure 206
4
Figure 207
Document uncontrolled when printed
7.
8.
9
6
9.
10.
Fit the handlebar back on the bike as indicated
in "11.6.1 Removing the handlebar".
4
8
Unhook the tooth (9).
Tighten the screw (6) with a 3 mm Allen
wrench, to eliminate any play.
Do not overtighten! The handlebar must
slide.
Position the cover (8).
Tighten the screws (4) with a 4 mm Allen
wrench.
Page 185