Technogym Group Cycle D92 Technical Service Manual page 190

10
Figure 218
11
Figure 219
Page 190
10.
Every time you remove the self-locking nut (9)
11.
11
To reassemble the seat's horizontal slider and fit
back on the bike, follow the aforementioned instruc-
tions in the reverse order.
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Remove the nut (10) with a 13 mm tubular
box wrench.
from the machine: it's requested to replace
the self-locking nut with the new one. The
self-locking nut must be tightened with a
torque wrench set to 3.9 Nm (2,88 lbf- ft).
Remove the quick-release lever (11).
Document uncontrolled when printed