Hall Sensor; Console (Connect Version); Old Wi-Fi Console - Technogym Group Cycle D92 Technical Service Manual

3.1.4 HALL SENSOR

The Hall Sensor is fixed to the device frame with 2 screws. It acquires the braking position based
on the distance between the magnets and the brake and sends this information to the Watt Sensor.
Each time the Hall Sensor and the brake frame are removed and/or replaced, the brake calibration
procedure must be performed.

3.1.5 CONSOLE (CONNECT VERSION)

3.1.5.1

OLD WI-FI CONSOLE

Display of the workout data: Speed (revs per minute), power (W), time and distance (mi: sec - km
/ mi), FC / AR (bpm), calories (kcal).
The console receives power from the Watt Sensor and the speed directly from the Transformer.
Technical specifications:
• backlit TOUCHPAD;
• Segment LCD;
• NFC reader;
• Bluetooth smart connectivity;
• WiFi compatibility;
The user can log in to the bike with a camera-fitted Smartphone using the dedicated QR Code.
To identify the type of console installed on Group Cycle (D92), see §
Page 30
Figure 7 - Hall sensor
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
"14.1.2 how to identify the
Document uncontrolled when printed