Removing The Belt Tensioner - Technogym Group Cycle D92 Technical Service Manual

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
11.5.2 REMOVING THE
BELT TENSIONER
1
Figure 152
Figure 153
Document uncontrolled when printed
1
2
Release tension from the belt tensioner as in-
dicated in "11.5.1 Tightening the transmission
belt".
1. Remove the screws (1) with a 6 mm Allen
wrench.
2. Rotate and remove the pulley (2).
To fit the belt tensioner back on the bike, follow the
aforementioned instructions in the reverse order.
Page 159