Technogym Group Cycle D92 Technical Service Manual page 125

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
After pressing Next, the screen "Group Cycle configuration area" appears.
CASE 1: The commands listed below are all active if the database contains the data for this specific
equipment.
• PROGRAM WATT SENSOR BOARD (WRITE SN AND TORQUE TABLE);
• WRITE SERIAL NUMBER;
• WRITE TORQUE TABLE;
• COMPARE BRAKE CALIBRATIONS;
• READ GENERATOR MODEL;
• WRITE GENERATOR MODEL;
• READ TORQUE TABLE.
Document uncontrolled when printed
Figure 99
Figure 100
Page 125