Structure For Entering Commands - Technogym Group Cycle D92 Technical Service Manual

6. The commands can now be entered, writing the string in the provided area.
Select the available COM
Command input eld

9.2 STRUCTURE FOR ENTERING COMMANDS

The structure of the command/message is: @COMANDO [ARG1] [ARG2]#
Character Required
@ YES
COMMAND YES
ARG1 NO
ARG2 NO
#
YES
(hash)
Page 104
Select the Baud Rate 19200
Figure 86
Description
Message start marker.
Command. The acceptable commands are described in the
following sections.
First Topic of the command (if required by the command).
Second Topic of the command (if required by the command).
Message end marker.
Table 22
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Select DTR
Make sure +CR is agged
Document uncontrolled when printed