Troubleshooting Case 4; Troubleshooting Case 5 - Technogym Group Cycle D92 Technical Service Manual

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
6.3.2.4

TROUBLESHOOTING CASE 4

Possible cause
Case 4
No RPM signal to
the display.
6.3.2.5

TROUBLESHOOTING CASE 5

Possible cause
Case 5
Belt slipping.
Document uncontrolled when printed
Components in-
volved
Connection ca-
ble (CU810 and Check cable continuity.
CU811).
Replace the cable or the current volt-
Voltage converter age converter.
defective.
Table 20
Components in-
volved
Belts.
Check the condition of the belts, adjust
Voltage regulation
the tension and/or replace.
unit.
Table 21
What to do:
What to do:
Page 45