Technogym Group Cycle D92 Technical Service Manual page 128

Once the command is selected, a window appears that displays the data loading progress:
If the AD values do not correspond with the factory values, a message appears stating that the
brake calibration is different from the one done in Technogym.
Clicking OK displays the following table, which contains:
- Difficulty levels;
- Read values;
- The values in the Technogym database;
- Value validity.
If the difference between the read value and the factory value is >20 --> Not OK: red line;
If the difference between the read value and the factory value is < or = 20 --> OK: green line;
Page 128
Technical Service Guide - Rev. 5.1
Figure 103
Figure 104
Document uncontrolled when printed
New Group Cycle (D92):