Removing And Assembling The Pedal - Technogym Group Cycle D92 Technical Service Manual

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1

11.2 REMOVING AND ASSEMBLING THE PEDAL

Figure 116
2
Figure 117
Figure 118
Document uncontrolled when printed
3
1. Rotate the pedal/pedal crank assembly
until it reaches the upright position.
2. Unscrew the pedal (2) from the pedal
crank (3) using a 15mm wrench (or using
the wrench provided for Bike Excite ped-
al cranks).
3. Apply a few drops of Loctite 2701 on the
pedal thread.
Page 139