Technogym Group Cycle D92 Technical Service Manual page 184

1
Figure 203
Figure 204
5
Figure 205
Page 184
2
3
Technical Service Guide - Rev. 5.1
3. Press the lever (1) and adjust the vertical
position of the post (2) until it is in posi-
tion "4".
4. Insert the limit into the rod.
5. Tighten the screw (3) with a 4 mm Allen
wrench.
6. Adjust the screw (5) with a 3 mm Allen
wrench, to eliminate any play.
Document uncontrolled when printed
New Group Cycle (D92):