Technogym Group Cycle D92 Technical Service Manual page 172

3
3
Figure 177
6
5
Figure 178
Figure 179
Page 172
7
Technical Service Guide - Rev. 5.1
3. Rotate the handlebar.
4. Remove the guides (3).
Use generic grease when re-assembling
the pin of the quick-release lever (10) The
grease must be applied in the lower part of
the screw but not in the thread of the screw.
5. Remove the screw (5) with a medium
Phillips screwdriver.
6. Remove the other cover (6).
7. Remove the screw (7) with a 2.5 mm Allen
wrench.
Document uncontrolled when printed
New Group Cycle (D92):