Table of Contents
Advertisement
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
14. PRODUCT MODIFICATIONS
14.1 NEW WI-FI / ANT+ CONSOLE
14.1.1
OPERATING PRINCIPLE
For details see
"3.1.5.2 new wi-fi / ant+ console".
14.1.2
HOW TO IDENTIFY THE TYPE OF CONSOLE
INSTALLED ON THE GROUP CYCLE (D92)
The appearance of the new WI-FI / ANT+ console is the same as the old WI-FI console.
To identify the type of console installed on the New Group Cycle (D92) ask your technician to
read the FW version of the console from the terminal, using the command @FWVER#:
BA01.xx: identifies the new WI-FI / ANT+ console;
BA02.xx: identifies the old WI-FI console.
(Examples of responses from the terminal:
WFW0548_BA01.12: new WI-FI / ANT+ console;
WFW0485_BA02.58: old WI-FI console.)
The label below the console also identifies the type of console. After removing the console from
the Group Cycle handlebar: if you read "WINC1500" between the FCC IDs, the console is the new
WI-FI / ANT+ console. ATTENTION: if the rear cover of the new console has already been removed
and replaced with another cover, the label is not a reliable source of information. Therefore, to de-
termine the type of console, you MUST ALWAYS read the FW version from the terminal.
14.1.3
CONSOLE UPGRADE: ASSEMBLY OF THE NEW WI-
FI / ANT+ CONSOLE ON THE NEW GROUP CYCLE (D92)
WITH THE OLD WI-FI CONSOLE INSTALLED
14.1.3.1
COMPATIBILITY WITH THE GC WITH THE NEW
ELECTRONICS (REV.2) AND THE OLD ELECTRONICS (REV.1)
•
The new WI-FI / ANT+ console can be installed on all New Group Cycles (D92) that have the new
electronics (Rev. 2).
•
The new WI-FI / ANT+ console can be installed on all New Group Cycles (D92) that have the old
electronics (REV.1), providing that the WATT SENSOR TONIC version is 2.4 or later.
Therefore, before starting to install the new console on a GC with the old electronics (REV.
Document uncontrolled when printed
Page 219
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
