Technogym Group Cycle D92 Technical Service Manual page 163

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
11
Figure 160
13
12
Figure 161
Document uncontrolled when printed
10 9
5. Remove the nut (9), the washer (10) and
the screw (11) with a 19 mm wrench and
a 6 mm Allen wrench.
Work from both sides counteracting the
wrenches.
ATTENTION: the total flywheel
weight is: 17 . 4 kg.
6. Remove the flywheel (12), the transmis-
sion belt and - where applicable - the gen-
erator belt.
Be careful with the spacers (13).
Page 163