Technogym Group Cycle D92 Technical Service Manual page 200

Figure 241
Figure 242
8
Figure 243
Page 200
8. Rotate the bike until the handlebar touch-
es the floor.
9. Loosen the screws (6) with a 3 mm Allen
wrench.
6
10. Rotate the bike back to its original posi-
tion.
11. Remove the right guard (7).
7
12. Remove the screws (8) using a medium
Phillips screwdriver.
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed