Technogym Group Cycle D92 Technical Service Manual page 89

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
CONFIGURING UNITY SELF:
4- From the display of the Unity Self: Access the service menu 2501 or customer menu 2406, con-
figure the Unity Self with a static IP (NETWORK section) and set the Facility URL (GENERAL
SETTINGS section).
Store the IP address of Unity Self because it must be used in the Group Cycle console configuration.
Group Cycles and Unity Self must have the same Facility URL.
5- Login to the Unity Self to verify that the Unity-Self is connected to a Network.
6- Download and open the "Equipment Set-Up" App, available for Android and iOS mobile
phones. It's strongly recommended to use an Android mobile phone.
Please note that to configure the device number and the name of the room the smartphone must be
connected to a network. Now it's not necessary yet to configure the smartphone to be an hotspot.
Document uncontrolled when printed
Figure 66)
Page 89