Configuring The Group Cycle App As The Main; Unity Self App; Second Network Configuration - Technogym Group Cycle D92 Technical Service Manual

RESTARTING THE UNITY SELF:
17- When all the consoles and UNITY SELF are configured, turn UNITY SELF off and back on. In
this way, UNITY SELF downloads the update database.
When changes are made in the class configuration, UNITY SELF must always be off and turned back
on. In this way, UNITY SELF downloads the update database.
NUMBERED ADHESIVES:
18.-Apply the numbered adhesives on the Group Cycle based on the class layout, if desired by
the customer. The numbered adhesive on the bike MUST CORRESPOND to the bike number set
in the Equipment Set-Up APP.
19- When you've configured all the Group Cycle, make the final test: On Unity Self click on GROUP
CYCLE CLASS button. Pedal on Group Cycle and check that each Group Cycle is visible on the
screen.
8.3 CONFIGURING THE GROUP CYCLE APP AS THE
MAIN UNITY SELF APP
The Group Cycle app can also be configured as the main UNITY SELF app:
1- In the menu 2406 or 2501 of UNITY SELF, in the GENERAL SETTINGS area, click on DASH-
BOARD in the "Select main app" field and select the Group Cycle app. Save the setting.
• Set by default to "off": the Group Cycle app, if installed, is present in the standard UNITY SELF
dashboard and the final user or the trainer must click on the "Group Cycle" tile to use it.
• When set to "on": the Group Cycle app starts automatically when UNITY SELF is turned on.
To exit the Group Cycle app, if set as the main app, repeatedly press the screen in the top left corner
of the display.

8.4 SECOND NETWORK CONFIGURATION

The Group Cycle Class configuration described below was done using an Android smartphone.
If the network was already configured on Group Cycle and you need to modify it, it's necessary
to follow the below procedure:
1 - Run the Equipment Set-up App and in the WI-FI NETWORK section configure Group Cycle
with the new network data.
2 - Click on START.
Page 100
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed