Technogym Group Cycle D92 Technical Service Manual page 85

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
3. If asked (depending on the operating system installed) "Do you want to repair the content?"
respond: "Continue without analysing".
4. Connect the upgrade key to the PC as soon as synchronised with the Equipment Software
Loader program:
• Open the "GC2" folder on the synchronised USB key;
• Open the "console_wifi-ant+" sub-folder.
• Drag the fw file (in this case the only one) for the console (ANT_BAxx_CAyy.sb) to the
equipment folder.
NOTE: the first fw file released for the new WI-FI / ANT+ console has the following string: GC3_
BAxx_CAyy.sb.
• Wait for the file to copy (approx. 10 seconds);
• Disconnect the MINI USB cable from the console, the console will turn off after a few sec-
onds.
• When the SW update is complete, put the protective cover back on the console's MINI USB
connector.
• Put the console back on the bike.
Document uncontrolled when printed
Figure 64
Page 85