Read Generator Model; Write Generator Model; Read Torque Table - Technogym Group Cycle D92 Technical Service Manual

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
If you want to extract the table to an Excel file, close the program.
Right click the Equipment Software Loader icon.
Click "Open file path".
Open the ComparisonResults folder.
Open the folder corresponding to the equipment serial number.
The table will be shown in Excel format, containing the information shown on the screen.
10.3.5

READ GENERATOR MODEL

This command checks if the set generator model is correct, according to the installed generator.
This option is only available in the Watt Sensor ID board.
10.3.6

WRITE GENERATOR MODEL

This command makes is possible to select the correct generator model and write this information
in the Watt Sensor board.
10.3.7

READ TORQUE TABLE

This command makes it possible to read the torque table, save it or use it to program a new board
with the same value.
Document uncontrolled when printed
Figure 105
Page 129