Technogym Group Cycle D92 Technical Service Manual page 86

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
5. Check on the terminal , using the command @FWVER#, that the correct SW version was
loaded.
It is very important to carry out this step, because if the incorrect sw is loaded on the new console, the
file will be transferred immediately to the folder, but no error message will appear. The console will
turn on and it will seem that everything functions correctly. However if you read the SW version on
the terminal, you will notice that the console will have kept the correct yet obsolete sw that it already
contained.
Page 86
Document uncontrolled when printed