New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Figure 90
The following screen appears that requests to select the correct Watt Sensor board installed in the
equipment:
- Watt Sensor Tonic: old electronics (rev.1);
- Watt Sensor ID: new electronics (rev. 2)
I t is possible to click "Automatic detect the watt sensor board", to have the system automatically
detect the type of board. This is useful if the guards were not removed and the Watt Sensor board
is not visible.
Click Next, to the lower right, to continue.
ATTENTION: select the correct Watt Sensor board.
Page 119
Document uncontrolled when printed