Technogym Group Cycle D92 Technical Service Manual page 182

2
1
Figure 199
3
Figure 200
Page 182
2. Loosen the screw (2) and replace the reg-
ister (1).
3. Tighten the screw (2).
4. Remove the screw (3) with a 3 mm Allen
wrench.
5. Remove the register (4).
6. Replace the register (4) and tighten the
screw (3).
4
New Group Cycle (D92):
Technical Service Guide - Rev. 5.1
Document uncontrolled when printed