Removing The Main Right Guard - Technogym Group Cycle D92 Technical Service Manual

11.3.2 REMOVING THE
MAIN RIGHT GUARD
1
Figure 127
2
Figure 128
3
Figure 129
Page 144
Technical Service Guide - Rev. 5.1
Remove the brake guard as indicated in
Removing brake guards".
1. Remove the screws (1) with a 3 mm Allen
wrench.
2. Push the protective lid (2) inwards with a
small Phillips screwdriver.
The protective lid (2) must be recovered.
3. Loosen the screw (3) with a 3 mm Allen
wrench.
Document uncontrolled when printed
New Group Cycle (D92):
"11.3.1