Equipment Software Loader; Steps Necessary For Accessing The Equipment Software Loader Program - Technogym Group Cycle D92 Technical Service Manual

New Group Cycle (D92):
Technical Service Guide - Rev. 5.1

10. EQUIPMENT SOFTWARE LOADER

For details, see the Equipment Software Loader manual, available on TG Direct.
10.1 STEPS NECESSARY FOR ACCESSING THE
EQUIPMENT SOFTWARE LOADER PROGRAM
Necessary tools:
▪ cable for Group Cycle programming;
▪ PC adapter;
▪ PC.
Disconnect the display from its connector. Connect the cable that goes to the Watt Sensor board
with the cable for Group Cycle programming. Use the PC adaptor cable to connect the PC to the
Group Cycle programming cable.
To access the menu from the PC, click the Equipment Software Loader icon
The following menu appears:
Document uncontrolled when printed
Figure 88
.
Page 117