Removing The Console With Velcro - Technogym Group Cycle D92 Technical Service Manual

If instead the perforated handlebar is found
in the field, the console with velcro must be
fastened to it: remove the rear cover from the
console with projections and fasten it to the
new console. The console is fastened to the
handlebar with screws.
11.1.1 REMOVING THE
CONSOLE WITH
VELCRO
1
Figure 106
Page 132
Technical Service Guide - Rev. 5.1
1. Remove the lock pin (1) to release the clip
securing the cable to the handlebar post.
Document uncontrolled when printed
New Group Cycle (D92):