Disassembling The Belt - Technogym RECLINE EXCITE Service Maintenance Manual

RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3

7.9. DISASSEMBLING THE BELT

Figure 7.9-1
Carry out the procedure described in paragraph
7.7. "Disassembling the guards".
1. Release the spring a of the belt tensioning
mechanism.
2. Remove the belt from the pulley.
To reassemble the belt, follow the disassembly
instructions in reverse order.
After completing this operation, adjust
the belt tension
paragraph 8.1. "Belt tension".
as described in
Page 7.23